Professor

• Cryogenic Coolant technologies

• Environmental safety
• Cryogenic cooling
• Nanomaterial
• Cryogenic treatment

• Manimaran, G. and Pradeep Kumar, M. “Multi-response optimization of grinding AISI 316 stainless steel using grey relational analysis”, Materials and Manufacturing Processes,Vol.28,No.4,pp.418-423,2013.
• Manimaran, G. and Pradeep Kumar, M. “Investigation of cooling environments in grinding EN31 steel”, Materials and Manufacturing Processes, Vol.28, No.4, 424-429,2013.
• Manimaran, G. and Pradeep Kumar, M. “Effect of cryogenic cooling and sol-gel alumina wheel on grinding AISI 316 stainless steel” Archives of civil and Mechanical Engineering, Elsevier publication, Vol.13, No.3, 304-312,2013.
• Manimaran, G. and Pradeep kumar, M. “The influence of liquid nitrogen as coolant on forces, surface roughness in grinding stainless steel 316” cryogenics, Elsevier publication,Vol.14,No.1,pp.304-312,2013.
• Manimaran, G and Pradeep Kumar, M. “Surface Modifications in grinding AISI D3 steel using cryogenic cooling”, Journal of the Brazilian society of Mechanical science and Engineering. Springer publication,37,1357-1363(2015).
• Manimaran, G and Pradeep Kumar, M. “Investigation Of Grinding Titanium Ti-6al-4v Alloy With Electroplated Cubic Boron Nitride Wheel Under Cryogenic Cooling”, Journal of Mechanical Science and technology. 11, No 29, 2015 ,4885-4890.
• Manimaran and N. Muthukrishnan M. Naresh Babu, “Experimental estimation of minimum quantity lubrication in turning on AISI 410 stainless steel” , International Journal of Machining and Machinability of Materials, Vol.19,No 6,2017
• Nimel sworna Ross, Manimaran.G, “Effect of cryogenic coolant on machinability of difficult-to-machine Ni–Cr alloy using PVD-TiAlN coated WC tool “, Journal of the Brazilian society of Mechanical science and Engineering. (2019) 41: 44. (Annexure I). IF – 1.74.
• Manimaran, G & Nimel Sworna Ross, K 2018, 'Surface Behavior of AISI H13 Alloy Steel Machining under Environmentally Friendly Cryogenic MQL with PVD-Coated Tool', Journal of Testing and Evaluation , ISSN: 0090-3973, vol-48,No4 (Annexure I). IF – 0.669. June 2020,No 3269-3280
• Nimel sworna Ross, Manimaran.G, “Machining investigation of Nimonic-80A super alloy under cryogenic CO2 as coolant using PVD-TiAlN/TiN coated tool at 45 ̊ Nozzle angle “,Arab J Sci Eng(2020). https://doi.org/10.1007/s13369-020-04728-8 (Annexure I). IF – 1.71.
• K.Nimel sworna Ross, Manimaran.G, “Investigation of Surface modification and Tool wer on milling Nimonic 80A under hybridlubricationNozzle“,Tribology Interntional(2020). https://doi.org/10.1016/j.triboint.2020.106762 (Annexure I). IF – 4.71.

• Manimaran, G. and PradeepKumar,M.“Investigation of Liquid nitrogen(LN₂)as
  coolant in grinding AISI D3 steel”, Advanced Material Research, Vol. 341-342,pp. 400- 405, 2012.
• G, Lakshman.k. “Design and optimization of low cost purifier for polluted water using Bio-degradable banana peel”, International journal of Applied Engineering Research, Vol.10, No 50, 2015
• Anandan .V, Manimaran.G. “Multi Response Optimization of Grinding Stainless Steel using Fuzzy ELECTRE Method”, International journal of Applied Engineering Research, Vol.10, No 80, 2015
• Anandan .V, Manimaran.G. “Response Optimization of Machining Parameters using VIKOR Method under Fuzzy Environment”, Global Journal of Pure and Applied Mathematics, Vol.12, No 01, 2016.
• Velmurugan,N , G, Ravi.S, D.Jayabalakrishnan, Mechanical property of stitched glass fiber, epoxy with bentonite clay composite using hand layup method”, Taga journal, vol.14,2018
• Vishal, R, Nimel Sworna Ross, K, Manimaran, G, & Gnanavel, BK 2019, 'Impact on Machining of AISI H13 Steel Using Coated Carbide Tool under Vegetable Oil Minimum Quantity Lubrication', Materials Performance and Characterization, vol. 8, no. 1, pp.20190154.p.no 527-537.

• System and Method to improve Manufacturing Using CMS - DOP: 05/02/2021
• Implementation of Six Sigma for Reducing defects – DOP : 19/02/2021

• Coordinator  Two Week ISTE workshop conducted by IIT Kharagpur ,20-30 May 2014

• Nano powdered aluminum alloys for improving heat conduction
• Cryogenic treatment for high efficient materials

• Phosphate and Borate Glasses for Gamma Ray Shielding

Name of the College	Designation	Joining Date	Relieving Date	Experience
				Years	Months	Days
Raja Rajeshwari Engineering College	Lecturer	07-07-1997	08-06-2001	3	11	1
T.J institute of Engineering and technology	Lecturer	25/06/2001	30/06/2006	5	-	05
Saveetha Engineering College	Lecturer	04/08/2008	30/05/2010	1	9	-
Saveetha Engineering College	Associate Professor	01/06/2010	30/05/2014	3	11	-
Saveetha Engineering College	Professor	2/06/2014	Till Date	6	10	4
Total				21	5	10

• Recognised supervisor – Anna University

• One

• 7

• Two Week ISTE  Workshop on “ENGINEERING MECHANICS” conducted by IIT-Bombay  from 26/11/2013  to 06/12/2013.
• Two Week ISTE  Workshop on “ENGINEERING THERMODYNAMICS” conducted by IIT-Bombay  from 11/12/2013  to 21/12/2013.
• Two week AICTE Sponsored Staff Developmenent Programme on “INDUSTRIAL ROBOTICS –Technology,programming, and application” conducted by Rajalakshmi Engineering college from 16/08/2012 to 29/08/2012.
• DST Sponsored National seminar on “Hybrid Renewable Energy System” conduted by Saveetha Engineering College from 19/02/2014 to 21/02/2014.
• Two Day Workshop on “Fail-safe Design, Early Detetion&nAvoiding Future Reurrence” organized by Department of Mehanical Engineering , Anna University from  28/10/20103 to 29/10/2013. 
• Two Day International Workshop on “Electromagnetic Forming Technolofy(EMFT 2010)” organized by Department of Mehanical Engineering , Anna University from  11/11/2010 to  12/11/2010.
• International engineering educator workshop conducted by IUCEE (US), Nov 20-22,2019 saveetha engineering college ,Chennai.
• AICTE short term course “outcome based education through ICT” conducted by NITTTR chandigah, March 5- march 9 2018.
• FDP on “Design of Jigs Fixtures and Press Tools” at College of Engineering Guindy, Anna University from 15/06/2009 to 23/06/2009.
• FDP on “Computer Integrated Manufacturing” at College of Engineering Guindy, Anna Unversity from 18/06/2014 to 25/06/2014.
• FDP on “Curriculum Development” conducted by Teaching Learning centre IIT Madras 07-09 May 2018.

• NPTEL online course “ waste water treatment and recycling” july-oct 2019 12 week programme, completed.
• IUCEE International Engineering Educator Certification Program 3 levels Spring 2020

• Funded Projects Availed: Under review
• Memberships: ISTE, SAE